NAME
mkhybrid - create an hybrid ISO9660/JOLIET/HFS filesystem
with optional Rock Ridge attributes.
SYNOPSIS
mkhybrid [ -abstract FILE ] [ -allow-lowercase ] [ - allow-
multidot ] [ -biblio FILE ] [ -b eltorito_boot_image ] [ -B
sparc_boot_image_list ] [ -G generic_boot_image ] [ -gui ] [
-C #,# ] [ -hard-disk-boot ] [ -no-emul-boot ] [ -no-boot ]
[ -boot-load-seg ] [ -boot-load-size ] [ -boot-info-table ]
[ -c boot_catalog ] [ -check-oldnames ] [ -copyright FILE ]
[ -A application_id ] [ -f ] [ -d ] [ -D ] [ -hide glob ] [
-hide-list file ] [ -hidden glob ] [ -hidden-list file ] [ -
hide-joliet glob ] [ -hide-joliet-list file ] [ - hide-
joliet-trans-tbl ] [ -hide-rr-moved ] [ -iso-level level ] [
-J ] [ -jcharset charset ] [ -l ] [ - L ] [ - log-file
log_file ] [ -max-iso9660-filenames ] [ -M path | device ] [
-nobak ] [ -no-bak ] [ -no-split-symlink-components ] [ -
no-split-symlink-fields ] [ -pad ] [ -path-list file ] [ -p
preparer ] [ -print-size ] [ -P publisher ] [ -quiet ] [ - r
] [ -R ] [ -relaxed-filenames ] [ -sort sort file ] [ -sysid
ID ] [ -T | -table-name TABLE_NAME ] [ -ucs-level level ] [
- use-fileversion ] [ -U ] [ -no-iso-translate ] [ -v ] [ -V
volid ] [ -volset ID ] [ -volset-size # ] [ -volset-seqno #
] [ -x path ] [ -exclude-list file ] [ -z ] [ -m glob ] [ -
hfs | -apple ] [ -map mapping_file ] [ -magic magic_file ] [
- probe ] [ -no-desktop ] [ -mac-name ] [ -boot-hfs-file
driver_file [ -part ] [ -auto AutoStart_file ] [ - cluster-
size size ] [ -hide-hfs glob ] [ -hide-hfs-list file ] [ -
hfs-volid hfs_volid ] [ -icon-position ] [ -root-info FILE [
-prep-boot FILE ] [ -hfs-creator CREATOR ] [ -hfs-type TYPE
] [ --cap ] [ --netatalk ] [ --double ] [ --ethershare ] [ -
-ushare ] [ --exchange ] [ --sgi ] [ --xinet ] [ --macbin ]
[ --single ] [ --dave ] [ --sfm ] - o filename pathspec
[pathspec]
DESCRIPTION
mkhybrid is effectively a pre-mastering program to generate
an HFS/ISO9660/JOLIET hybrid filesystem. It is based on
mkisofs(1) and will generate a pure ISO9660 filesystem
unless the HFS hybrid command line options are given.
mkhybrid can generate a true (or shared) HFS hybrid filesys-
tem. The same files are seen as HFS files when accessed from
a Macintosh and as ISO9660 files when accessed from other
machines. HFS stands for Hierarchical File System and is the
native file system used on Macintosh computers.
As an alternative, mkhybrid can generate the Apple Enten-
sions to ISO9660 for each file. These extensions provide
each file with CREATOR, TYPE and certain Finder Flags when
accessed from a Macintosh. See the MACINTOSH FILE FORMATS
section below.
mkhybrid takes a snapshot of a given directory tree, and
generates a binary image which will correspond to an ISO9660
or HFS filesystem when written to a block device.
mkhybrid is also capable of generating the System Use Shar-
ing Protocol records specified by the Rock Ridge Interchange
Protocol. This is used to further describe the files in the
iso9660 filesystem to a unix host, and provides information
such as longer filenames, uid/gid, posix permissions, and
block and character devices.
Each file written to the iso9660 filesystem must have a
filename in the 8.3 format (8 characters, period, 3 charac-
ters, all upper case), even if Rock Ridge is in use. This
filename is used on systems that are not able to make use of
the Rock Ridge extensions (such as MS-DOS), and each
filename in each directory must be different from the other
filenames in the same directory. mkhybrid generally tries
to form correct names by forcing the unix filename to upper
case and truncating as required, but often times this yields
unsatisfactory results when there are cases where the trun-
cated names are not all unique. mkhybrid assigns weightings
to each filename, and if two names that are otherwise the
same are found the name with the lower priority is renamed
to have a 3 digit number as an extension (where the number
is guaranteed to be unique). An example of this would be
the files foo.bar and foo.bar.~1~ - the file foo.bar.~1~
would be written as FOO.000;1 and the file foo.bar would be
written as FOO.BAR;1
When used with various HFS options, mkhybrid will attempt to
recognise files stored in a number of Apple/Unix file for-
mats and will copy the data and resource forks as well as
any relevant finder information. See the MACINTOSH FILE FOR-
MATS section below for more about formats mkhybrid supports.
Note that mkhybrid is not designed to communicate with the
writer directly. Most writers have proprietary command sets
which vary from one manufacturer to another, and you need a
specialized tool to actually burn the disk. The cdwrite
utility is one such tool that runs under Linux and performs
this task. The latest version of cdwrite is capable of com-
municating with the Phillips/IMS/Kodak, HP and Yamaha drives
that have been manufactured before 1997. Most writers come
with some version of DOS software that allows a direct image
copy of an iso9660 image to the writer. The current version
of cdwrite is available from
ftp://sunsite.unc.edu/utils/disk-management/cdwrite-
2.0.tar.gz Note that cdwrite has not been actively main-
tained since 1995.
The cdrecord utility is another utility capable of burning
an actual disc. The latest version of cdrecord is available
from ftp://ftp.berlios.de/pub/cdrecord Cdrecord is
under constant development.
Also you should know that most cd writers are very particu-
lar about timing. Once you start to burn a disc, you cannot
let their buffer empty before you are done, or you will end
up with a corrupt disc. Thus it is critical that you be
able to maintain an uninterrupted data stream to the writer
for the entire time that the disc is being written.
pathspec is the path of the directory tree to be copied into
the iso9660 filesystem. Multiple paths can be specified,
and mkhybrid will merge the files found in all of the speci-
fied path components to form the cdrom image.
It is possible to graft the paths at points other than the
root directory, and it is possible to graft files or direc-
tories onto the cdrom image with names different than what
they have in the source filesystem. This is easiest to
illustrate with a couple of examples. Let's start by
assuming that a local file ../old.lis exists, and you wish
to include it in the cdrom image.
foo/bar/=../old.lis
will include the file old.lis in the cdrom image at
/foo/bar/old.lis, while
foo/bar/xxx=../old.lis
will include the file old.lis in the cdrom image at
/foo/bar/xxx. The same sort of syntax can be used with
directories as well. mkhybrid will create any directories
required such that the graft points exist on the cdrom image
- the directories do not need to appear in one of the paths.
Any directories that are created on the fly like this will
have permissions 0555 and appear to be owned by the person
running mkhybrid. If you wish other permissions or owners
of the intermediate directories, the easiest solution is to
create real directories in the path such that mkhybrid
doesn't have to invent them.
mkhybrid will also run on Win9X/NT4 machines when compiled
with Cygnus' cygwin (available from
http://sourceware.cygnus.com/cygwin/). Therefore most refer-
ences in this man page to Unix can be replaced with Win32.
OPTIONS
-abstract FILE
Specifies the abstract file name. This parameter can
also be set in the file .mkisofsrc with ABST=filename.
If specified in both places, the command line version
is used.
-A application_id
Specifies a text string that will be written into the
volume header. This should describe the application
that will be on the disc. There is space on the disc
for 128 characters of information. This parameter can
also be set in the file .mkisofsrc with APPI=id. If
specified in both places, the command line version is
used.
-allow-lowercase
This options allows lower case characters to appear in
iso9660 filenames.
This violates the ISO9660 standard, but it happens to
work on some systems. Use with caution.
-allow-multidot
This options allows more than one dot to appear in
iso9660 filenames. A leading dot is not affected by
this option, it may be allowed separately using the - L
option.
This violates the ISO9660 standard, but it happens to
work on many systems. Use with caution.
-biblio FILE
Specifies the bibliographic file name. This parameter
can also be set in the file .mkisofsrc with
BIBLO=filename. If specified in both places, the com-
mand line version is used.
-b eltorito_boot_image
Specifies the path and filename of the boot image to be
used when making an "El Torito" bootable CD. The path-
name must be relative to the source path specified to
mkhybrid. This option is required to make an "El Tor-
ito" bootable CD. The boot image must be exactly the
size of either a 1.2, 1.44, or a 2.88 meg floppy, and
mkhybrid will use this size when creating the output
iso9660 filesystem. It is assumed that the first 512
byte sector should be read from the boot image (it is
essentially emulating a normal floppy drive). This
will work, for example, if the boot image is a LILO
based boot floppy.
-B img_sun4,img_sun4c,img_sun4m,img_sun4d,img_sun4e
Specifies a comma separated list of boot images that
are needed to make a bootable CD for sparc systems.
There may be empty fields in the comma separated list.
This option is required to make a bootable CD for Sun
sparc systems. If the -B or - sparc-boot option has
been specified, the first sector of the resulting image
will contain a Sun disk label. This disk label speci-
fies slice 0 for the iso9660 image and slice 1 ...
slice 7 for the boot images that have been specified
with this option. Byte offset 512 ... 8191 within each
of the additional boot images must contain a primary
boot that works for the appropriate sparc architecture.
The rest of each of the images usually contains an ufs
filesystem that is used primary kernel boot stage.
The implemented boot method is the boot method found
with SunOS 4.x and SunOS 5.x. However, it does not
depend on SunOS internals but only on properties of the
Open Boot prom. For this reason, it should be usable
for any OS that boots off a sparc system.
If the special filename ... is used, the actual and all
following boot partitions are mapped to the previous
partition. If mkhybrid is called with -G image - B ...
all boot partitions are mapped to the partition that
contains the iso9660 filesystem image and the generic
boot image that is located in the first 16 sectors of
the disk is used for all architectures.
-G generic_boot_image
Specifies the path and filename of the generic boot
image to be used when making a generic bootable CD.
The generic_boot_image will be placed on the first 16
sectors of the CD. The first 16 sectors are the sectors
that are located before the iso9660 primary volume
descriptor. If this option is used together with the -
sparc-boot option, the Sun disk label will overlay the
first 512 bytes of the generic boot image.
-hard-disk-boot
Specifies that the boot image used to create "El Tor-
ito" bootable CDs is a hard disk image. The hard disk
image must begin with a master boot record that con-
tains a single partition.
-no-emul-boot
Specifies that the boot image used to create "El Tor-
ito" bootable CDs is a 'no emulation' image. The system
will load and execute this image without performing any
disk emulation.
-no-boot
Specifies that the created "El Torito" CD should be
marked as not bootable. The system will provide an emu-
lated drive for the image, but will boot off a standard
boot device.
-boot-load-seg segment_address
Specifies the load segment address of the boot image
for no-emulation "El Torito" CDs.
-boot-load-size load_sectors
Specifies the number of "virtual" (512-byte) sectors to
load in no-emulation mode. The default is to load the
entire boot file. Some BIOSes may have problems if
this is not a multiple of 4.
-boot-info-table
Specifies that a 56-byte table with information of the
CD-ROM layout will be patched in at offset 8 in the
boot file. If this option is given, the boot file is
modified in the source filesystem, so make sure to make
a copy if this file cannot be easily regenerated! See
the BOOT INFO TABLE section for a description of this
table.
-C last_sess_start,next_sess_start
This option is needed when mkhybrid is used to create
the image of a second session or a higher level session
for a multi session disk. The option -C takes a pair
of two numbers separated by a comma. The first number
is the sector number of the first sector in the last
session of the disk that should be appended to. The
second number is the starting sector number of the new
session. The expected pair of numbers may be retrieved
by calling cdrecord -msinfo ... the -C option may only
be uses in conjunction with the -M option.
-c boot_catalog
Specifies the path and filename of the boot catalog to
be used when making an "El Torito" bootable CD. The
pathname must be relative to the source path specified
to mkhybrid. This option is required to make a bootable
CD. This file will be inserted into the output tree
and not created in the source filesystem, so be sure
the specified filename does not conflict with an exist-
ing file, as it will be excluded. Usually a name like
"boot.catalog" is chosen.
-check-oldnames
Check all filenames imported from old session for com-
pliance with actual mkhybrid iso9660 file naming rules.
It his option is not present, only names with a length
> 31 are checked as these files are a hard violation of
the iso9660 standard.
-copyright FILE
Specifies the Copyright file name. This parameter can
also be set in the file .mkisofsrc with COPY=filename.
If specified in both places, the command line version
is used.
-d Omit trailing period from files that do not have a
period.
This violates the ISO9660 standard, but it happens to
work on many systems. Use with caution.
-D Do not use deep directory relocation, and instead just
pack them in the way we see them.
This violates the ISO9660 standard, but it happens to
work on many systems. Use with caution.
-f Follow symbolic links when generating the filesystem.
When this option is not in use, symbolic links will be
entered using Rock Ridge if enabled, otherwise the file
will be ignored.
-gui Switch the behaviour for a GUI. This currently makes
the output more verbose but may have other effects in
future.
-hide glob
Hide glob from being seen on the ISO9660 or Rock Ridge
directory. glob is a shell wild-card-style pattern
that must match any part of the filename or path. Mul-
tiple globs may be hidden. If glob matches a direc-
tory, then the contents of that directory will be hid-
den. All the hidden files will still be written to the
output CD image file. Should be used with the - hide-
joliet option.
-hide-list file
A file containing a list of globs to be hidden as
above.
-hidden glob
Add the hidden (existence) ISO9660 directory attribute
for glob. This attribute will prevent glob from being
listed on DOS based systems if the /A flag is not used
for the listing. glob is a shell wild-card-style pat-
tern that must match any part of the filename or path.
Multiple globs may be hidden.
-hidden-list file
A file containing a list of globs to get the hidden
attribute as above.
-hide-joliet glob
Hide glob from being seen on the Joliet directory.
glob is a shell wild-card-style pattern that must match
any part of the filename or path. Multiple globs may
be hidden. If glob matches a directory, then the con-
tents of that directory will be hidden. All the hidden
files will still be written to the output CD image
file. Should be used with the -hide option.
-hide-joliet-list file
A file containing a list of globs to be hidden as
above.
-hide-joliet-trans-tbl
Hide the TRANS.TBL files from the Joliet tree. These
files usually don't make sense in the Joliet World as
they list the real name and the ISO9660 name which may
both be different from the Joliet name.
-hide-rr-moved
Rename the directory RR_MOVED to .rr_moved in the Rock
Ridge tree. It seems to be impossible to completely
hide the RR_MOVED directory from the Rock Ridge tree.
This option only makes the visible tree better to
understand for people who don't know what this direc-
tory is for. If you need to have no RR_MOVED directory
at all, you should use the -D option. Note that in case
that the -D option has been specified, the resulting
filesystem is not ISO9660 level-1 compliant and will
not be readable on MS-DOS.
-l Allow full 31 character filenames. Normally the
ISO9660 filename will be in an 8.3 format which is com-
patible with MS-DOS, even though the ISO9660 standard
allows filenames of up to 31 characters. If you use
this option, the disc may be difficult to use on a MS-
DOS system, but this comes in handy on some other sys-
tems (such as the Amiga). Use with caution.
-iso-level level
Set the iso9660 conformance level. Valid numbers are
1..3.
With level 1, no associated files are allowed and
filenames are restricted to 8.3 characters.
With level 2, no associated files are allowed.
With level 3, no restrictions apply.
With all iso9660 levels all filenames are restricted to
upper case letters, numbers and the underscore (_). The
maximum filename length is restricted to 31 characters,
the directory nesting level is restricted to 8 and the
maximum path length is limited to 255 characters.
-J Generate Joliet directory records in addition to regu-
lar iso9660 file names. This is primarily useful when
the discs are to be used on Windows-NT or Windows-95
machines. The Joliet filenames are specified in
Unicode and each path component can be up to 64 Unicode
characters long.
-jcharset charset
Local charset that should be used for translating local
file names into Joliet Unicode directory records. To
get a list of valid charset names, call mkhybrid -
jcharset help. To get a 1:1 mapping, you may use
default as charset name. The default initial values are
cp437 on DOS based systems and iso8859-1 on all other
systems. If the -jcharset option is specified, the - J
option is implied.
-L Allow ISO9660 filenames to begin with a period. Usu-
ally, a leading dot is replaced with an underscore in
order to maintain MS-DOS compatibility.
This violates the ISO9660 standard, but it happens to
work on many systems. Use with caution.
-log-file log_file
Redirect all error, warning and informational messages
to log_file instead of the standard error.
-m glob
Exclude glob from being written to CDROM. glob is a
shell wild-card-style pattern that must match part of
the filename (not the path as with option -x). Techni-
cally glob is matched against the d->d_name part of the
directory entry. Multiple globs may be excluded.
Example:
mkhybrid -o rom -m '*.o' -m core -m foobar
would exclude all files ending in ".o", called "core"
or "foobar" to be copied to CDROM. Note that if you had
a directory called "foobar" it too (and of course all
its descendants) would be excluded.
NOTE: The -m and -x option description should both be
updated, they are wrong. Both now work identical and
use filename globbing. A file is excluded if either the
last component matches or the whole path matches.
-exclude-list file
A file containing a list of globs to be exclude as
above.
-max-iso9660-filenames
Allow 37 chars in iso9660 filenames. This option
forces the -N option as the extra name space is taken
from the space reserved for ISO-9660 version numbers.
This violates the ISO9660 standard, but it happens to
work on many systems. Although a conforming applica-
tion needs to provide a buffer space of at least 37
characters, disks created with this option may cause a
buffer overflow in the reading operating system. Use
with extreme care.
-M path
or
-M device
Specifies path to existing iso9660 image to be merged.
The alternate form takes a SCSI device specifier that
uses the same syntax as the dev= parameter of cdrecord.
The output of mkhybrid will be a new session which
should get written to the end of the image specified in
- M. Typically this requires multi-session capability
for the recorder and cdrom drive that you are attempt-
ing to write this image to. This option may only be
used in conjunction with the -C option.
-N Omit version numbers from ISO9660 file names.
This violates the ISO9660 standard, but no one really
uses the version numbers anyway. Use with caution.
-nobak
-no-bak
Do not include backup files files on the iso9660
filesystem. If the -no-bak option is specified, files
that contain the characters '~' or '#' or end in '.bak'
will not be included (these are typically backup files
for editors under unix).
-no-rr
Do not use the Rock Ridge attributes from previous ses-
sions. This may help to avoid getting into trouble
when mkhybrid finds illegal Rock Ridge signatures on an
old session.
-no-split-symlink-components
Don't split the SL components, but begin a new Con-
tinuation Area (CE) instead. This may waste some space,
but the SunOS 4.1.4 cdrom driver has a bug in reading
split SL components (link_size = component_size instead
of link_size += component_size).
-no-split-symlink-fields
Don't split the SL fields, but begin a new Continuation
Area (CE) instead. This may waste some space, but the
SunOS 4.1.4 and Solaris 2.5.1 cdrom driver have a bug
in reading split SL fields (a `/' can be dropped).
-o filename
is the name of the file to which the iso9660 filesystem
image should be written. This can be a disk file, a
tape drive, or it can correspond directly to the device
name of the optical disc writer. If not specified,
stdout is used. Note that the output can also be a
block special device for a regular disk drive, in which
case the disk partition can be mounted and examined to
ensure that the premastering was done correctly.
-pad Pad the end of the ISO9660 by 16 sectors (32kB). If
the total size then is not a multiple of 16 sectors,
the needed number of sectors is added. If the option -
B is used, then there is a second padding at the end of
the boot partitions.
The padding is neded as many operating systems (e.g.
Linux) implement read ahead bugs in their filesystem
I/O. These bugs result in read errors on one or more
files that are located at the end of a track. They are
usually present when the CD is written in Track at Once
mode or when the disk is written as mixed mode CD where
an audio track follows the data track.
-path-list file
A file containing a list of pathspec directories and
filenames to be added to the ISO9660 filesystem. This
list of pathspecs are processed after any that appear
on the command line. If the argument is -, then the
list is read from the standard input. There must be at
least one pathspec given on the command line as well.
-P publisher_id
Specifies a text string that will be written into the
volume header. This should describe the publisher of
the CDROM, usually with a mailing address and phone
number. There is space on the disc for 128 characters
of information. This parameter can also be set in the
file .mkisofsrc with PUBL=. If specified in both
places, the command line version is used.
-p preparer_id
Specifies a text string that will be written into the
volume header. This should describe the preparer of
the CDROM, usually with a mailing address and phone
number. There is space on the disc for 128 characters
of information. This parameter can also be set in the
file .mkisofsrc with PREP=. If specified in both
places, the command line version is used.
-print-size
Print estimated filesystem size and exit. This option
is needed for Disk At Once mode and with some CD-R
drives when piping directly into cdrecord. In this case
it is needed to know the size of the filesystem before
the actual CD-creation is done. The option -print-size
allows to get this size from a "dry-run" before the CD
is actually written.
-quiet
This makes mkhybrid even less verbose. No progress
output will be provided.
-R Generate SUSP and RR records using the Rock Ridge pro-
tocol to further describe the files on the iso9660
filesystem.
-r This is like the -R option, but file ownership and
modes are set to more useful values. The uid and gid
are set to zero, because they are usually only useful
on the author's system, and not useful to the client.
All the file read bits are set true, so that files and
directories are globally readable on the client. If
any execute bit is set for a file, set all of the exe-
cute bits, so that executables are globally executable
on the client. If any search bit is set for a direc-
tory, set all of the search bits, so that directories
are globally searchable on the client. All write bits
are cleared, because the CD-Rom will be mounted read-
only in any case. If any of the special mode bits are
set, clear them, because file locks are not useful on a
read-only file system, and set-id bits are not desir-
able for uid 0 or gid 0. When used on Win32, the exe-
cute bit is set on all files. This is a result of the
lack of file permissions on Win32 and the Cygwin POSIX
emulation layer.
-relaxed-filenames
The option -relaxed-filenames allows ISO9660 filenames
to include digits, uppercase characters and all other 7
bit ASCII characters (resp. anything except lowercase
characters).
This violates the ISO9660 standard, but it happens to
work on many systems. Use with caution.
-sort sort file
Sort file locations on the media. Sorting is controlled
by a file that contains pairs of filenames and sorting
offset weighting. If the weighting is higher, the file
will be located closer to the beginning of the media,
if the weighting is lower, the file will be located
closer to the end of the media.
-sysid ID
Specifies the system ID. This parameter can also be
set in the file .mkisofsrc with SYSI=system_id. If
specified in both places, the command line version is
used.
-T Generate a file TRANS.TBL in each directory on the
CDROM, which can be used on non-Rock Ridge capable sys-
tems to help establish the correct file names. There
is also information present in the file that indicates
the major and minor numbers for block and character
devices, and each symlink has the name of the link file
given.
-table-name TABLE_NAME
Alternative translation table file name (see above).
Implies the -T option. If you are creating a multi-
session image you must use the same name as in the pre-
vious session.
-ucs-level level
Set Unicode conformance level in the Joliet SVD. The
default level is 3. It may be set to 1..3 using this
option.
-use-fileversion
The option -use-fileversion allows mkhybrid to use file
version numbers from the filesystem. If the option is
not specified, mkhybrid creates a version if 1 for all
files. File versions are strings in the range ;1 to
;32767 This option is the default on VMS.
-U Allows "Untranslated" filenames, completely violating
the iso9660 standards described above. Forces on the -
d, -l, -L, -N and - no-iso-translate flags, and also
allows more than one '.' character in the filename, as
well as mixed case filenames. This is useful on HP-UX
system, where the built-in CDFS filesystem does not
recognize ANY extensions. Use with extreme caution.
-no-iso-translate
Do not translate the characters '#' and '~' which are
invalid for iso9660 filenames. These characters are
though invalid often used by Microsoft systems.
This violates the ISO9660 standard, but it happens to
work on many systems. Use with caution.
-V volid
Specifies the volume ID (volume name or label) to be
written into the master block. This parameter can also
be set in the file .mkisofsrc with VOLI=id. If speci-
fied in both places, the command line version is used.
Note that if you assign a volume ID, this is the name
that will be used as the mount point used by the
Solaris volume management system and the name that is
assigned to the disc on a Windows or Mac platform.
-volset ID
Specifies the volset ID. This parameter can also be
set in the file .mkisofsrc with VOLS=volset_id. If
specified in both places, the command line version is
used.
-volset-size #
Sets the volume set size to #. The volume set size is
the number of CD's that are in a CD set. The -volset-
size option may be used to create CD's that are part of
e.g. a Operation System installation set of CD's. The
option -volset-size must be specified before - volset-
seqno on each command line.
-volset-seqno #
Sets the volume set sequence number to #. The volume
set sequence number is the index number of the current
CD in a CD set. The option -volset-size must be speci-
fied before -volset-seqno on each command line.
-v Verbose execution. If given twice on the command line,
extra debug information will be printed.
-x path
Exclude path from being written to CDROM. path must be
the complete pathname that results from concatenating
the pathname given as command line argument and the
path relative to this directory. Multiple paths may be
excluded. Example:
mkhybrid -o cd -x /local/dir1 -x /local/dir2 /local
NOTE: The -m and -x option description should both be
updated, they are wrong. Both now work identical and
use filename globbing. A file is excluded if either the
last component matches or the whole path matches.
- z Generate special SUSP records for transparently
compressed files. This is only of use and interest for
hosts that support transparent decompression. This is
an experimental feature, and no hosts yet support this,
but there are ALPHA patches for Linux that can make use
of this feature.
HFS OPTIONS
-hfs Create an ISO9660/HFS hybrid CD. This option should be
used in conjunction with the -map, -magic and/or the
various double dash options given below.
-apple
Create an ISO9660 CD with Apple's extensions. Similar
to the -hfs option, except that the Apple Extensions to
ISO9660 are added instead of creating an HFS hybrid
volume.
-map mapping_file
Use the mapping_file to set the CREATOR and TYPE infor-
mation for a file based on the filename's extension. A
filename is mapped only if it is not one of the know
Apple/Unix file formats. See the CREATOR/TYPE section
below.
-magic magic_file
The CREATOR and TYPE information is set by using a
file's magic number (usually the first few bytes of a
file). The magic_file is only used if a file is not one
of the known Apple/Unix file formats, or the filename
extension has not been mapped using the - map option.
See the CREATOR/TYPE section below for more details.
-hfs-creator CREATOR
Set the default CREATOR for all files. Must be exactly
4 characters. See the CREATOR/TYPE section below for
more details.
-hfs-type TYPE
Set the default TYPE for all files. Must be exactly 4
characters. See the CREATOR/TYPE section below for more
details.
-probe
Search the contents of files for all the known
Apple/Unix file formats. See the MACINTOSH FILE FOR-
MATS section below for more about these formats. How-
ever, the only way to check for MacBinary and AppleSin-
gle files is to open and read them. Therefore this
option may increase processing time. It is better to
use one or more double dash options given below if the
Apple/Unix formats in use are known.
-no-desktop
Do not create (empty) Desktop files. New HFS Desktop
files will be created when the CD is used on a Macin-
tosh (and stored in the System Folder). By default,
empty Desktop files are added to the HFS volume.
-mac-name
Use the HFS filename as the starting point for the
ISO9660, Joliet and Rock Ridge file names. See the
MACINTOSH FILE NAMES section below for more informa-
tion.
-boot-hfs-file driver_file
Installs the driver_file that may make the CD bootable
on a Macintosh. See the HFS BOOT DRIVER section below.
(Alpha).
-part
Generate an HFS partition table. By default, no parti-
tion table is generated, but some older Macintosh CDROM
drivers need an HFS partition table on the CDROM to be
able to recognize a hybrid CDROM.
-auto AutoStart_file
Make the HFS CD use the QuickTime 2.0 Autostart feature
to launch an application or document. The given
filename must be the name of a document or application
located at the top level of the CD. The filename must
be less than 12 characters. (Alpha).
-cluster-size size
Set the size in bytes of the cluster or allocation
units of PC Exchange files. Implies the --exchange
option. See the MACINTOSH FILE FORMATS section below.
-hide-hfs glob
Hide glob from the HFS volume. The file or directory
will still exist in the ISO9660 and/or Joliet direc-
tory. glob is a shell wild-card-style pattern that
must match any part of the filename Multiple globs may
be excluded. Example:
mkhybrid -o rom -hfs -hide-hfs '*.o' -hide-hfs foobar
would exclude all files ending in ".o" or called
"foobar" from the HFS volume. Note that if you had a
directory called "foobar" it too (and of course all its
descendants) would be excluded. The glob can also be a
path name relative to the source directories given on
the command line. Example:
mkhybrid -o rom -hfs -hide-hfs src/html src
would exclude just the file or directory called "html"
from the "src" directory. Any other file or directory
called "html" in the tree will not be excluded. Should
be used with the -hide and/or -hide-joliet options.
-hide-hfs-list file
A file containing a list of globs to be hidden as
above.
-hfs-volid hfs_volid
Volume name for the HFS partition. This is the name
that is assigned to the disc on a Macintosh and
replaces the volid used with the -V option
-icon-position
Use the icon position information, if it exists, from
the Apple/Unix file. The icons will appear in the same
position as they would on a Macintosh desktop. Folder
location and size on screen, its scroll positions,
folder View (view as Icons, Small Icons, etc.) are also
preserved. This option may become set by default in
the future. (Alpha).
-root-info file
Set the location, size on screen, scroll positions,
folder View etc. for the root folder of an HFS volume.
See README.rootinfo for more information. (Alpha)
-prep-boot FILE
PReP boot image file. Up to 4 are allowed. See
README.prep_boot (Alpha)
--cap
Look for AUFS CAP Macintosh files. Search for CAP
Apple/Unix file formats only. Searching for the other
possible Apple/Unix file formats is disabled, unless
other double dash options are given.
--netatalk
Look for NETATALK Macintosh files
--double
Look for AppleDouble Macintosh files
--ethershare
Look for Helios EtherShare Macintosh files
--ushare
Look for IPT UShare Macintosh files
--exchange
Look for PC Exchange Macintosh files
--sgi
Look for SGI Macintosh files
--xinet
Look for XINET Macintosh files
--macbin
Look for MacBinary Macintosh files
--single
Look for AppleSingle Macintosh files
--dave
Look for Thursby Software Systems DAVE Macintosh files
--sfm
Look for Microsoft's Services for Macintosh files (NT
only) (Alpha)
CREATOR/TYPE
A Macintosh file has two properties associated with it which
define which application created the file, the CREATOR and
what data the file contains, the TYPE. Both are (exactly) 4
letter strings. Usually this allows a Macintosh user to
double-click on a file and launch the correct application
etc. The CREATOR and TYPE of a particular file can be found
by using something like ResEdit (or similar) on a Macintosh.
The CREATOR and TYPE information is stored in all the vari-
ous Apple/Unix encoded files. For other files it is possi-
ble to base the CREATOR and TYPE on the filename's extension
using a mapping file (the -map option) and/or using the
magic number (usually a signature in the first few bytes) of
a file (the -magic option). If both these options are given,
then their order on the command line is important. If the -
map option is given first, then a filename extension match
is attempted before a magic number match. However, if the -
magic option is given first, then a magic number match is
attempted before a filename extension match.
If a mapping or magic file is not used, or no match is found
then the default CREATOR and TYPE for all regular files can
be set by using entries in the .mkisofsrc file or using the
-hfs-creator and/or -hfs-type options, otherwise the default
CREATOR and TYPE are 'unix' and 'TEXT'.
The format of the mapping file is the same afpfile format as
used by aufs. This file has five columns for the extension,
file translation, CREATOR, TYPE and Comment. Lines starting
with the '#' character are comment lines and are ignored. An
example file would be like:
# Example filename mapping file
#
# EXTN XLate CREATOR TYPE Comment
.tif Raw '8BIM' 'TIFF' "Photoshop TIFF image"
.hqx Ascii 'BnHq' 'TEXT' "BinHex file"
.doc Raw 'MSWD' 'WDBN' "Word file"
.mov Raw 'TVOD' 'MooV' "QuickTime Movie"
* Ascii 'ttxt' 'TEXT' "Text file"
Where:
The first column EXTN defines the Unix filename exten-
sion to be mapped. The default mapping for any filename
extension that doesn't match is defined with the "*"
character.
The Xlate column defines the type of text translation
between the Unix and Macintosh file it is ignored by
mkhybrid, but is kept to be compatible with aufs(1).
Although mkhybrid does not alter the contents of a
file, if a binary file has it's TYPE set as 'TEXT', it
may be read incorrectly on a Macintosh. Therefore a
better choice for the default TYPE may be '????'
The CREATOR and TYPE keywords must be 4 characters long
and enclosed in single quotes.
The comment field is enclosed in double quotes - it is
ignored by mkhybrid, but is kept to be compatible with
aufs.
The format of the magic file is almost identical to the
magic(4) file used by the Linux file(1) command - the rou-
tines for reading and decoding the magic file are based on
the Linux file(1) command.
This file has four tab separated columns for the byte
offset, type, test and message. Lines starting with the '#'
character are comment lines and are ignored. An example file
would be like:
# Example magic file
#
# off type test message
0 string GIF8 8BIM GIFf GIF image
0 beshort 0xffd8 8BIM JPEG image data
0 string SIT! SIT! SIT! StuffIt Archive
0 string 37235 LZIV ZIVU standard unix compress
0 string 37213 GNUz ZIVU gzip compressed data
0 string %! ASPS TEXT Postscript
0 string 04%! ASPS TEXT PC Postscript with a ^D to start
4 string moov txtt MooV QuickTime movie file (moov)
4 string mdat txtt MooV QuickTime movie file (mdat)
The format of the file is described in the magic(4) man
page. The only difference here is that for each entry in the
magic file, the message for the initial offset must be 4
characters for the CREATOR followed by 4 characters for the
TYPE - white space is optional between them. Any other char-
acters on this line are ignored. Continuation lines (start-
ing with a '>') are also ignored i.e. only the initial
offset lines are used.
Using the -magic option may significantly increase process-
ing time as each file has to opened and read to find it's
magic number.
In summary, for all files, the default CREATOR is 'unix' and
the default TYPE is 'TEXT'. These can be changed by using
entries in the .mkisofsrc file or by using the - hfs-creator
and/or -hfs-type options.
If the a file is in one of the known Apple/Unix formats (and
the format has been selected), then the CREATOR and TYPE are
taken from the values stored in the Apple/Unix file.
Other files can have their CREATOR and TYPE set from their
file name extension (the -map option), or their magic number
(the -magic option). If the default match is used in the
mapping file, then these values override the default CREATOR
and TYPE.
A full CREATOR/TYPE database can be found at
http://www.angelfire.com/il/szekely/index.html
MACINTOSH FILE FORMATS
Macintosh files have two parts called the Data and Resource
fork. Either may be empty. Unix (and many other OSs) can
only cope with files having one part (or fork). To add to
this, Macintosh files have a number of attributes associated
with them - probably the most important are the TYPE and
CREATOR. Again Unix has no concept of these types of attri-
butes.
e.g. a Macintosh file may be a JPEG image where the image is
stored in the Data fork and a desktop thumbnail stored in
the Resource fork. It is usually the information in the data
fork that is useful across platforms.
Therefore to store a Macintosh file on a Unix filesystem, a
way has to be found to cope with the two forks and the extra
attributes (which are referred to as the finder info).
Unfortunately, it seems that every software package that
stores Macintosh files on Unix has chosen a completely dif-
ferent storage method.
The Apple/Unix formats that mkhybrid (partially) supports
are:
CAP AUFS format
Data fork stored in a file. Resource fork in subdirec-
tory .resource with same filename as data fork. Finder
info in .finderinfo subdirectory with same filename.
AppleDouble/Netatalk
Data fork stored in a file. Resource fork stored in a
file with same name prefixed with "%". Finder info also
stored in same "%" file. Netatalk uses the same format,
but the resource fork/finderinfo stored in subdirectory
.AppleDouble with same name as data fork.
AppleSingle
Data structures similar to above, except both forks and
finder info are stored in one file.
Helios EtherShare
Data fork stored in a file. Resource fork and finder
info together in subdirectory .rsrc with same filename
as data fork.
IPT UShare
Very similar to the EtherShare format, but the finder
info is stored slightly differently.
MacBinary
Both forks and finder info stored in one file.
Apple PC Exchange
Used by Macintoshes to store Apple files on DOS (FAT)
disks. Data fork stored in a file. Resource fork in
subdirectory resource.frk (or RESOURCE.FRK). Finder
info as one record in file finder.dat (or FINDER.DAT).
Separate finder.dat for each data fork directory.
Note: mkhybrid needs to know the native FAT cluster
size of the disk that the PC Exchange files are on (or
have been copied from). This size is given by the -
cluster-size option. The cluster or allocation size
can be found by using the DOS utility CHKDSK.
May not work with PC Exchange v2.2 or higher files
(available with MacOS 8.1). DOS media containing PC
Exchange files should be mounted as type msdos (not
vfat) when using Linux.
SGI/XINET
Used by SGI machines when they mount HFS disks. Data
fork stored in a file. Resource fork in subdirectory
.HSResource with same name. Finder info as one record
in file .HSancillary. Separate .HSancillary for each
data fork directory.
Thursby Software Systems DAVE
Allows Macintoshes to store Apple files on SMB servers.
Data fork stored in a file. Resource fork in subdirec-
tory resource.frk. Uses the AppleDouble format to store
resource fork.
Services for Macintosh
Format of files stored by NT Servers on NTFS filesys-
tems. Data fork is stored as "filename". Resource fork
stored as a NTFS stream called "filename:AFP_Resource".
The finder info is stored as a NTFS stream called
"filename:Afp_AfpInfo". These streams are normally
invisible to the user.
Warning: mkhybrid only partially supports the SFM for-
mat. If an HFS file or folder stored on the NT server
contains an illegal NT character in its name, then NT
converts these characters to Private Use Unicode char-
acters. The characters are: " * / < > ? | also a space
or period if it is the last character of the file name,
character codes 0x01 to 0x1f (control characters) and
Apple' apple logo.
Unfortunately, these private Unicode characters are not
readable by the mkhybrid NT executable. Therefore any
file or directory name containing these characters will
be ignored - including the contents of any such direc-
tory.
mkhybrid will attempt to set the CREATOR, TYPE, date and
possibly other flags from the finder info. Additionally, if
it exists, the Macintosh filename is set from the finder
info, otherwise the Macintosh name is based on the Unix
filename - see the MACINTOSH FILE NAMES section below.
When using the -apple option, the TYPE and CREATOR are
stored in the optional System Use or SUSP field in the
ISO9660 Directory Record - in much the same way as the Rock
Ridge attributes are. In fact to make life easy, the Apple
extensions are added at the beginning of the existing Rock
Ridge attributes (i.e. to get the Apple extensions you get
the Rock Ridge extensions as well).
The Apple extensions require the resource fork to be stored
as an ISO9660 associated file. This is just like any normal
file stored in the ISO9660 filesystem except that the asso-
ciated file flag is set in the Directory Record (bit 2).
This file has the same name as the data fork (the file seen
by non-Apple machines). Associated files are normally
ignored by other OSs
When using the -hfs option, the TYPE and CREATOR plus other
finder info, are stored in a separate HFS directory, not
visible on the ISO9660 volume. The HFS directory references
the same data and resource fork files described above.
In most cases, it is better to use the -hfs option instead
of the - apple option, as the latter imposes the limited
ISO9660 characters allowed in filenames. However, the Apple
extensions do give the advantage that the files are packed
on the disk more efficiently and it may be possible to fit
more files on a CD - important when the total size of the
source files is approaching 650MB.
MACINTOSH FILE NAMES
Where possible, the HFS filename that is stored with an
Apple/Unix file is used for the HFS part of the CD. However,
not all the Apple/Unix encodings store the HFS filename with
the finderinfo. In these cases, the Unix filename is used -
with escaped special characters. Special characters include
'/' and characters with codes over 127.
Aufs escapes these characters by using ":" followed by the
character code as two hex digits. Netatalk and EtherShare
have a similar scheme, but uses "%" instead of a ":".
If mkhybrid can't find an HFS filename, then it uses the
Unix name, with any %xx or :xx characters (xx == two hex
digits) converted to a single character code. If "xx" are
not hex digits ([0-9a-fA-F]), then they are left alone -
although any remaining ":" is converted to "%" as colon is
the HFS directory separator. Care must be taken, as an ordi-
nary Unix file with %xx or :xx will also be converted. e.g.
This:2fFile converted to This/File
This:File converted to This%File
This:t7File converted to This%t7File
Although HFS filenames appear to support upper and lower
case letters, the filesystem is case insensitive. i.e. the
filenames "aBc" and "AbC" are the same. If a file is found
in a directory with the same HFS name, then mkhybrid will
attempt, where possible, to make a unique name by adding '_'
characters to one of the filenames.
If an HFS filename exists for a file, then mkhybrid can use
this name as the starting point for the ISO9660, Joliet and
Rock Ridge filenames using the -mac-name option. Normal Unix
files without an HFS name will still use their Unix name.
e.g.
If a MacBinary (or PC Exchange) file is stored as
someimage.gif.bin on the Unix filesystem, but contains a HFS
file called someimage.gif, then this is the name that would
appear on the HFS part of the CD. However, as mkhybrid uses
the Unix name as the starting point for the other names,
then the ISO9660 name generated will probably be
SOMEIMAG.BIN and the Joliet/Rock Ridge would be
someimage.gif.bin. Although the actual data (in this case)
is a GIF image. This option will use the HFS filename as the
starting point and the ISO9660 name will probably be
SOMEIMAG.GIF and the Joliet/Rock Ridge would be
someimage.gif.
Using the -mac-name option will not currently work with the
- T option - the Unix name will be used in the TRANS.TBL
file, not the Macintosh name.
The existing mkhybrid code will filter out any illegal char-
acters for the ISO9660 and Joliet filenames, but as mkhybrid
expects to be dealing directly with Unix names, it leaves
the Rock Ridge names as is. But as '/' is a legal HFS
filename character, the -mac-name option coverts '/' to a
'_' in a Rock Ridge filenames.
If the Apple extensions are used, then only the ISO9660
filenames will appear on the Macintosh. However, as the
Macintosh ISO9660 drivers can use Level 2 filenames, then
you can use the -l option without problems on a Macintosh -
still take care over the names, for example this.file.name
will be converted to THIS.FILE i.e. only have one '.', also
filename abcdefgh will be seen as ABCDEFGH but abcdefghi
will be seen as ABCDEFGHI. i.e. with a '.' at the end -
don't know if this is a Macintosh problem or
mkisofs/mkhybrid problem. All filenames will be in uppercase
when viewed on a Macintosh. Of course, DOS/Win3.X machines
will not be able to see Level 2 filenames...
CUSTOM VOLUME/FOLDER ICONS
To give a HFS CD a custom icon, make sure the root (top
level) folder includes a standard Macintosh volume icon
file. To give a volume a custom icon on a Macintosh, an icon
has to be pasted over the volume's icon in the "Get Info"
box of the volume. This creates an invisible file called
'Icon\r' ('\r' is the 'carriage return' character) in the
root folder.
A custom folder icon is very similar - an invisible file
called 'Icon\r' exits in the folder itself.
Probably the easiest way to create a custom icon that mkhy-
brid can use, is to format a blank HFS floppy disk on a Mac,
paste an icon to its "Get Info" box. If using Linux with the
HFS module installed, mount the floppy using something like:
mount -t hfs /dev/fd0 /mnt/floppy
The floppy will be mounted as a CAP file system by default.
Then run mkhybrid using something like:
mkhybrid --cap -o output source_dir /mnt/floppy
If you are not using Linux, then you can use the hfsutils to
copy the icon file from the floppy. However, care has to be
taken, as the icon file contains a control character. e.g.
hmount /dev/fd0
hdir -a
hcopy -m Icon^V^M icon_dir/icon
Where '^V^M' is control-V followed by control-M. Then run
mkhybrid by using something like:
mkhybrid --macbin -o output source_dir icon_dir
The procedure for creating/using custom folder icons is very
similar - paste an icon to folder's "Get Info" box and
transfer the resulting 'Icon\r' file to the relevant direc-
tory in the mkhybrid source tree.
You may want to hide the icon files from the ISO9660 and
Joliet trees.
To give a custom icon to a Joliet CD, follow the instruc-
tions found at:
http://www.fadden.com/cdrfaq/faq03.html#[3-21]
HFS BOOT DRIVER
It may be possible to make the hybrid CD bootable on a
Macintosh.
A bootable HFS CD requires an Apple CD-ROM (or compatible)
driver, a bootable HFS partition and the necessary System,
Finder, etc. files.
A driver can be obtained from any other Macintosh bootable
CD-ROM using the apple_driver utility. This file can then be
used with the -boot-hfs-file option.
The HFS partition (i.e. the hybrid disk in our case) must
contain a suitable System Folder, again from another CD-ROM
or disk.
For a partition to be bootable, it must have it's boot block
set. The boot block is in the first two blocks of a parti-
tion. For a non-bootable partition the boot block is full of
zeros. Normally, when a System file is copied to partition
on a Macintosh disk, the boot block is filled with a number
of required settings - unfortunately I don't know the full
spec for the boot block, so I'm guessing that the following
will work OK.
Therefore, the utility apple_driver also extracts the boot
block from the first HFS partition it finds on the given
CD-ROM and this is used for the HFS partition created by
mkhybrid.
PLEASE NOTE
By using a driver from an Apple CD and copying Apple
software to your CD, you become liable to obey Apple
Computer, Inc. Software License Agreements.
BOOT INFORMATION TABLE
When the -boot-info-table option is given, mkhybrid will
modify the boot file specified by the -b option by inserting
a 56-byte "boot information table" at offset 8 in the file.
This modification is done in the source filesystem, so make
sure you use a copy if this file is not easily recreated!
This file contains pointers which may not be easily or reli-
ably obtained at boot time.
The format of this table is as follows; all integers are in
section 7.3.1 ("little endian") format.
Offset Name Size Meaning
8 bi_pvd 4 bytes LBA of primary volume descriptor
12 bi_file 4 bytes LBA of boot file
16 bi_length 4 bytes Boot file length in bytes
20 bi_csum 4 bytes 32-bit checksum
24 bi_reserved 40 bytes Reserved
The 32-bit checksum is the sum of all the 32-bit words in
the boot file starting at byte offset 64. All linear block
addresses (LBAs) are given in CD sectors (normally 2048
bytes).
CONFIGURATION
mkhybrid looks for the .mkisofsrc file, first in the current
working directory, then in the user's home directory, and
then in the directory in which the mkhybrid binary is
stored. This file is assumed to contain a series of lines
of the form TAG=value, and in this way you can specify cer-
tain options. The case of the tag is not significant. Some
fields in the volume header are not settable on the command
line, but can be altered through this facility. Comments
may be placed in this file, using lines which start with a
hash (#) character.
APPI The application identifier should describe the applica-
tion that will be on the disc. There is space on the
disc for 128 characters of information. May be over-
ridden using the -A command line option.
COPY The copyright information, often the name of a file on
the disc containing the copyright notice. There is
space in the disc for 37 characters of information.
May be overridden using the -copyright command line
option.
ABST The abstract information, often the name of a file on
the disc containing an abstract. There is space in the
disc for 37 characters of information. May be overrid-
den using the -abstract command line option.
BIBL The bibliographic information, often the name of a file
on the disc containing a bibliography. There is space
in the disc for 37 characters of information. May be
overridden using the -bilio command line option.
PREP This should describe the preparer of the CDROM, usually
with a mailing address and phone number. There is
space on the disc for 128 characters of information.
May be overridden using the -p command line option.
PUBL This should describe the publisher of the CDROM, usu-
ally with a mailing address and phone number. There is
space on the disc for 128 characters of information.
May be overridden using the -P command line option.
SYSI The System Identifier. There is space on the disc for
32 characters of information. May be overridden using
the -sysid command line option.
VOLI The Volume Identifier. There is space on the disc for
32 characters of information. May be overridden using
the -V command line option.
VOLS The Volume Set Name. There is space on the disc for
128 characters of information. May be overridden using
the -volset command line option.
HFS_TYPE
The default TYPE for Macintosh files. Must be exactly 4
characters. May be overridden using the -hfs-type com-
mand line option.
HFS_CREATOR
The default CREATOR for Macintosh files. Must be
exactly 4 characters. May be overridden using the -
hfs-creator command line option.
mkhybrid can also be configured at compile time with
defaults for many of these fields. See the file defaults.h.
EXAMPLES
To create a HFS hybrid CD with the Joliet and Rock Ridge
extensions of the source directory cd_dir:
% mkhybrid -o cd.iso -r -J -hfs cd_dir
To create a HFS hybrid CD from the source directory cd_dir
that contains Netatalk Apple/Unix files:
% mkhybrid -o cd.iso --netatalk cd_dir
To create a HFS hybrid CD from the source directory cd_dir,
giving all files CREATOR and TYPES based on just their
filename extensions listed in the file "mapping".:
% mkhybrid -o cd.iso -map mapping cd_dir
To create a CD with the 'Apple Extensions to ISO9660', from
the source directories cd_dir and another_dir. Files in all
the known Apple/Unix format are decoded and any other files
are given CREATOR and TYPE based on their magic number given
in the file "magic":
% mkhybrid -o cd.iso -apple -magic magic -probe \
cd_dir another_dir
The following example puts different files on the CD that
all have the name README, but have different contents when
seen as a ISO9660/RockRidge, Joliet or HFS CD.
Current directory contains:
% ls -F
README.hfs README.joliet README.unix cd_dir/
The following command puts the contents of the directory
"cd_dir" on the CD along with the three README files - but
only one will be seen from each of the three filesystems:
% mkhybrid -o cd.iso -hfs -J -r \
-hide README.hfs -hide README.joliet \
-hide-joliet README.hfs -hide-joliet README.unix \
-hide-hfs README.joliet -hide-hfs README.unix \
README=README.hfs README=README.joliet \
README=README.unix cd_dir
i.e. the file README.hfs will be seen as README on the HFS
CD and the other two README files will be hidden. Similarly
for the Joliet and ISO9660/RockRidge CD.
There are probably all sorts of strange results possible
with combinations of the hide options ...
AUTHOR
mkisofs is not based on the standard mk*fs tools for unix,
because we must generate a complete copy of an existing
filesystem on a disk in the iso9660 filesystem. The name
mkisofs is probably a bit of a misnomer, since it not only
creates the filesystem, but it also populates it as well.
Eric Youngdale <ericy@gnu.ai.mit.edu> or <eric@andante.org>
wrote both the Linux isofs9660 filesystem and the mkisofs
utility. The copyright for the mkisofs utility is held by
Yggdrasil Computing, Incorporated.
mkhybrid is based on mkisofs and works in exactly the same
way as mkisofs without the HFS options. The change in name
is to signify that it does something extra. If you do not
need the HFS options, then you should really be using
mkisofs.
HFS hybrid code Copyright (C) James Pearson 1997, 1998,
1999, 2000
libhfs code Copyright (C) 1996, 1997 Robert Leslie
libfile code Copyright (C) Ian F. Darwin 1986, 1987, 1989,
1990, 1991, 1992, 1994, 1995.
NOTES
Mkhybrid may safely be installed suid root. This may be
needed to allow mkhybrid to read the previous session when
creating a multi session image.
BUGS
o Any files that have hard links to files not in the
tree being copied to the iso9660 filesystem will have
an incorrect file reference count.
o Does not check for SUSP record(s) in "." entry of the
root directory to verify the existence of Rock Ridge
enhancements.
This problem is present when reading old sessions while
adding data in multi-session mode.
o Does not properly read relocated directories in
multi-session mode when adding data.
Any relocated deep directory is lost if the new session
does not include the deep directory.
Repeat by: create first session with deep directory
relocation then add new session with a single dir that
differs from the old deep path.
o Does not re-use RR_MOVED when doing multi-session from
TRANS.TBL
o Does not create whole_name entry for RR_MOVED in
multi-session mode.
There may be some other ones. Please, report them to the
author.
HFS PROBLEMS/LIMITATIONS
I have had to make several assumptions on how I expect the
modified libhfs routines to work, however there may be
situations that either I haven't thought of, or come across
when these assumptions fail. Therefore I can't guarantee
that mkhybrid will work as expected (although I haven't had
a major problem yet). Most of the HFS features work fine,
however, some are not fully tested. These are marked as
Alpha above.
Although HFS filenames appear to support upper and lower
case letters, the filesystem is case insensitive. i.e. the
filenames "aBc" and "AbC" are the same. If a file is found
in a directory with the same HFS name, then mkhybrid will
attempt, where possible, to make a unique name by adding '_'
characters to one of the filenames.
HFS file/directory names that share the first 31 characters
have _N' (N == decimal number) substituted for the last few
characters to generate unique names.
Care must be taken when "grafting" Apple/Unix files or
directories (see above for the method and syntax involved).
It is not possible to use a new name for an Apple/Unix
encoded file/directory. e.g. If a Apple/Unix encoded file
called "oldname" is to added to the CD, then you can not use
the command line:
mkhybrid -o output.raw -hfs newname=oldname cd_dir
mkhybrid will be unable to decode "oldname". However, you
can graft Apple/Unix encoded files or directories as long as
you do not attempt to give them new names as above.
When creating an HFS volume with the multisession options, -
M and -C, only files in the last session will be in the HFS
volume. i.e. mkhybrid can not add existing files from previ-
ous sessions to the HFS volume.
Symbolic links (as with all other non-regular files) are not
added to the HFS directory.
Hybrid volumes may be larger than pure ISO9660 volumes con-
taining the same data.
The resulting hybrid volume can be accessed on a Unix
machine by using the hfsutils routines. However, no changes
should be made to the contents of the volume as it's not a
"real" HFS volume.
Using the -mac-name option will not currently work with the
- T option - the Unix name will be used in the TRANS.TBL
file, not the Macintosh name.
Although mkhybrid does not alter the contents of a file, if
a binary file has it's TYPE set as 'TEXT', it may be read
incorrectly on a Macintosh. Therefore a better choice for
the default TYPE may be '????'
The -mac-boot-file option may not work at all...
May not work with PC Exchange v2.2 or higher files (avail-
able with MacOS 8.1). DOS media containing PC Exchange
files should be mounted as type msdos (not vfat) when using
Linux.
The SFM format is only partially supported - see MACINTOSH
FILE FORMATS section above.
It is not possible to use the the -sparc-boot or - generic-
boot options with the -boot-hfs-file or -prep-boot options.
SEE ALSO
mkisofs(8), magic(5), apple_driver(8)
FUTURE IMPROVEMENTS
Some sort of gui interface.
AVAILABILITY
mkisofs is available as part of the cdrecord package from
ftp://ftp.berlios.de/pub/cdrecord/
mkhybrid is available from ftp://ftp.ge.ucl.ac.uk/pub/mkhfs
and hfsutils from ftp://ftp.mars.org/pub/hfs
MAILING LISTS
If you want to actively take part on the development of
mkisofs, and/or mkhybrid, you may join the cdwriting mailing
list by sending mail to:
other-cdwrite-request@lists.debian.org
and include the word subscribe in the body. The mail
address of the list is:
cdwrite@lists.debian.org
MKHYBRID MAINTAINER
James Pearson
j.pearson@ge.ucl.ac.uk
MKISOFS MAINTAINER
Joerg Schilling
Seestr. 110
D-13353 Berlin
Germany
Mail bugs and suggestions to:
schilling@fokus.gmd.de or js@cs.tu-berlin.de or
joerg@schily.isdn.cs.tu-berlin.de
Man(1) output converted with
man2html
GMD Homepage
FOKUS Homepage
Schily's Homepage
