The Remote-SCSI protocol gives you SCSI-Anywhere features. There are three possible ways to control access to the remote users: - Let the remote scsi lib log in as a standard user. In this case rscsi will be called via sh -c /opt/schily/sbin/rscsi NOTE: In this case, rscsi must be installed suid root. --- This would need to allow any valid local user to access SCSI ---- It could be a security problem. - Log in as root and call rscsi via sh -c /opt/schily/sbin/rscsi NOTE that this will fore you to allow remote logins as root which is considered to be a security hole. - Create one or more special user(s) that have /opt/schily/sbin/rscsi as login shell with their own home directory. You then may create special .rhost files for each user. NOTE: In this case, rscsi must be installed suid root. **** This is the preferred method **** To enable remote SCSI via the login shell method you should do the following: - Add an entry to /etc/passwd in the form: rscsi:x:1999:1000:Tape:/export/home/rscsi:/opt/schily/sbin/rscsi (modify this according to your OS). And don't forget to modify /etc/shadow the way it needs to be on your OS. - Create a home directory for this user and add a .rhosts file to allow access to all users you like. - Install rscsi suid root into /opt/schily/sbin - Install a file /etc/default/rscsi and define access rights. Without this file, rscsi will not work at all. The template for this file is: rscsi/rscsi.dfl RSCSI Security: - When rscsi starts, it checks if /etc/default/rscsi exists. If not, it dies. - If rscsi is not called by a user listed in /etc/default/rscsi it dies. - To acess a SCSI target there must be an entry that lists the user rcsi hast been started from, the hostname and the SCSI target. rscsi compares the hostname field in /etc/default/rscsi to the peername retrived from STDIN: - legal host name IP connection - "ILLEGAL_SOCKET" Not an IP socket - "NOT_IP" Not a socket RSCSI Security hints: - Do not generally allow other users to see your boot disk via RSCSI. All people who see this disk may edit yhour passwd file. - If you are in doubt, only export CD-ROM drives, scanners and similar devices that are not directly security sensitive. If anybody sees a security hole in my security precautions, plese send me a mail! RSCSI usage: - To use remote SCSI devices you need to know how to access a specific remote SCSI target. - dev=REMOTE:host: or dev=REMOTE:host will allow you to do SCSI bus scanning while you log in as yourself - dev=REMOTE:user@host: or dev=REMOTE:user@host will allow you to do SCSI bus scanning while you log in as "user" If you use the setup described above, you should use: dev=REMOTE:rscsi@babbel: to do SCSI Bus scanning on host babbel - To access a specific SCSI device, you must specify dev=REMOTE:host: or dev=REMOTE:user@host: is the SCSI target specification as it is needed on the remote host dev=REMOTE:rscsi@babbel:1,3,0 Will let you log in as rscsi on host babbel and open Target 3 lun 0 on SCSI bus #1 - If you use cdrecord -vv ...., cdrecord will on startup print some information about the remote libscg version used for the connection. - To be able to use the remote SCSI client code from win32 you need to create a file /etc/passwd with a corect entry for the user you are on win32. Call 'id' to get the right user id. Note that remote SCSI has not yet been tested on Win32. RSCSI speed: - On a Ultra-10 running Solaris 8, the command overhead time is 400 usec. You may achieve up to 9900 kB/s via a 100MB/s ethernet connection bewteen two of such machines. - With 100 MB/s, 12x recording should be no problem. - With 10 MB/s, 4x recording is the maximum. Do tests before! - Logging into a remote machine and running cdrecord on the remote machine causes the buffer cache on that machine to be trashed. The main user is disturbed. - Doing cdrecording via Remote SCSI causes only the rscsi command with less than 200kB to be needed on the remote machine hosting the CD recorder. The main user on that machine is not disturbed. The buffer cache of the machine running cdrecord is trashed. - It is desirable to use a Burn-Proof recorder to make sure that network load will not cause buffer underruns. - USER= test and test for hostname are using a pattern matcher.